900 & 9100 SeriesRefrigeratorsInstallation Requirementsfor Models:9162 9163 9182 9183962 963 982 983NORCOLDP O BOX 4248SIDNEY OH 45365-42
Flame Failure Safety Device CheckOut The purpose of the gas safety device is to preventescape of unburned gas from burner if the burnerflame is extin
Lighting Instructions - 9100 SeriesNote: 12 volt DC must be available for both the Auto and Manual modes.1. Auto Mode - Push the ON/OFF button (E) to
Table of contentsRead this manual carefully and become thoroughly acquainted with its contents before installing this refrigerator.Be alert to potenti
•Never bend, drop, drill, weld, manipulate, or hammer the refrigerant system. Doing so can cause the system torupture, releasing chemicals that can ir
In Canada:a. Current CGA B149.1 and CGA B149.2 installation code for PropaneAppliances and Equipment.b. Current CSA Z240.4.2 Installation Requirement
The air passage from the intake vent to the refrigerator coils and from the refrigerator coils through the exhaustvent must be unobstructed.Table 1 -
A.G.A. and CGA certification permits installing the refrigerator with zero (0) inches clearance betweenthe refrigerator and any adjacent w
Combustion Seals Inspectionand Trim Piece InstallationCombustion seals are attached to theback surface of the mounting flanges (top,bottom, and both s
Route the gas supply piping to limit the possibility of vibration and abrasion. The gas supply piping should enterthe refrigerator enclosure near the
The distance the current travels from the battery to the refrigerator dictates the wire size. Undersized wire canresult in a voltage drop, which will
Comments to this Manuals